Bài giảng Mạng máy tính cơ bản - Chương 5: Hệ thống cáp của LAN và WAN Cabling LAN and WAN - Phan Vĩnh Thuần

Nội dung text: Bài giảng Mạng máy tính cơ bản - Chương 5: Hệ thống cáp của LAN và WAN Cabling LAN and WAN - Phan Vĩnh Thuần

1. Chương 5 HỆ THỐNG CÁP CỦA LAN VÀ WAN CABLING LAN AND WAN Overview • Even though each local-area network is unique, there are many design aspects that are common to all LANs. For example, most LANs follow the same standards and the same components. This module presents information on elements of Ethernet LANs and common LAN devices. Phan Vĩnh Thuần Computer Network 1
2. • There are several wide-area network (WAN) connections available today. They range from dial-up to broadband access, and differ in bandwidth, cost, and required equipment. This module presents information on the various types of WAN connections. Phan Vĩnh Thuần Computer Network 2
3. • Students completing this module should be able to: – Identify characteristics of Ethernet networks. – Identify straight-through, crossover, and rollover cables. – Describe the function, advantages, and disadvantages of repeaters, hubs, bridges, switches, and wireless network components. – Describe the function of peer-to-peer networks. Phan Vĩnh Thuần Computer Network 3
4. – Describe the function, advantages, and disadvantages of client-server networks. – Describe and differentiate between serial, Integrated Services Digital Network (ISDN), digital subscriber line (DSL), and cable modem WAN connections. – Identify router serial ports, cables, and connectors. – Identify and describe the placement of equipment used in various WAN configurations. Phan Vĩnh Thuần Computer Network 4
5. 5.1. Cabling the LAN 5.1.1. LAN physical layer • Various symbols are used to represent media types. Token Ring is represented by a circle. Fiber Distributed Data Interface (FDDI) is represented by two concentric circles and the Ethernet symbol is represented by a straight line. Serial connections are represented by a lightning bolt. Phan Vĩnh Thuần Computer Network 5
6. Phan Vĩnh Thuần Computer Network 6
7. • Each computer network can be built with many different media types. The function of media is to carry a flow of information through a LAN. Wireless LANs use the atmosphere, or space, as the medium. Other networking media confine network signals to a wire, cable, or fiber. Networking media are considered Layer 1, or physical layer, components of LANs. Phan Vĩnh Thuần Computer Network 7
8. • Each media has advantages and disadvantages. Some of the advantage or disadvantage comparisons concern: – Cable length – Cost – Ease of installation – Susceptibility to interference • Coaxial cable, optical fiber, and even free space can carry network signals. However, the principal medium that will be studied is Category 5 unshielded twisted-pair cable (Cat 5 UTP) which includes the Cat 5e family of cables. Phan Vĩnh Thuần Computer Network 8
9. • Many topologies support LANs, as well as many different physical media. The figure shows a subset of physical layer implementations that can be deployed to support Ethernet. Phan Vĩnh Thuần Computer Network 9
10. Phan Vĩnh Thuần Computer Network 10
11. 5.1.2. Ethenet trong khuôn viên trường học (Ethernet in the campus) • Ethernet is the most widely used LAN technology. Ethernet was first implemented by the Digital, Intel, and Xerox group, referred to as DIX. DIX created and implemented the first Ethernet LAN specification, which was used as the basis for the Institute of Electrical and Electronics Engineers (IEEE) 802.3 specification, released in 1980. Phan Vĩnh Thuần Computer Network 11
12. • Later, the IEEE extended 802.3 to three new committees known as 802.3u (Fast Ethernet), 802.3z (Gigabit Ethernet over Fiber), and 802.3ab (Gigabit Ethernet over UTP). • Network requirements might dictate that an upgrade to one of the faster Ethernet topologies be used. Most Ethernet networks support speeds of 10 Mbps and 100 Mbps. Phan Vĩnh Thuần Computer Network 12
13. • The new generation of multimedia, imaging, and database products, can easily overwhelm a network running at traditional Ethernet speeds of 10 and 100 Mbps. Network administrators may consider providing Gigabit Ethernet from the backbone to the end user. Costs for installing new cabling and adapters can make this prohibitive. Gigabit Ethernet to the desktop is not a standard installation at this time. Phan Vĩnh Thuần Computer Network 13
14. • In general, Ethernet technologies can be used in a campus network in several different ways: – An Ethernet speed of 10 Mbps can be used at the user level to provide good performance. Clients or servers that require more bandwidth can use 100- Mbps Ethernet. – Fast Ethernet is used as the link between user and network devices. It can support the combination of all traffic from each Ethernet segment. Phan Vĩnh Thuần Computer Network 14
15. – To enhance client-server performance across the campus network and avoid bottlenecks, Fast Ethernet can be used to connect enterprise servers. – Fast Ethernet or Gigabit Ethernet, as affordable, should be implemented between backbone devices Phan Vĩnh Thuần Computer Network 15
16. Phan Vĩnh Thuần Computer Network 16
17. 5.1.3. Nhu cầu đường truyền Ethenet và bộ nối (Ethernet media and connector requirements) • Before selecting an Ethernet implementation, consider the media and connector requirements for each implementation. Also, consider the level of performance needed by the network. Phan Vĩnh Thuần Computer Network 17
18. • The cables and connector specifications used to support Ethernet implementations are derived from the Electronic Industries Association and the Telecommunications Industry Association (EIA/TIA) standards body. The categories of cabling defined for Ethernet are derived from the EIA/TIA-568 (SP-2840) Commercial Building Telecommunications Wiring Standards. Phan Vĩnh Thuần Computer Network 18
19. • The figure compares the cable and connector specifications for the most popular Ethernet implementations. It is important to note the difference in the media used for 10-Mbps Ethernet versus 100- Mbps Ethernet. Networks with a combination of 10- and 100-Mbps traffic use UTP Category 5 to support Fast Ethernet. Phan Vĩnh Thuần Computer Network 19
20. Phan Vĩnh Thuần Computer Network 20
21. 5.1.4. Môi trường kết nối (Connection media) • The figure illustrates the different connection types used by each physical layer implementation. The registered jack (RJ-45) connector and jack are the most common. RJ-45 connectors are discussed in more detail in the next section. Phan Vĩnh Thuần Computer Network 21
22. • In some cases the type of connector on a network interface card (NIC) does not match the media that it needs to connect to. As shown in Figure, an interface may exist for the 15-pin attachment unit interface (AUI) connector. The AUI connector allows different media to connect when used with the appropriate transceiver. A transceiver is an adapter that converts one type of connection to another. Typically, a transceiver converts an AUI to RJ-45, coax, or fiber optic connector. On 10BASE5 Ethernet, or Thicknet, a short cable is used to connect the AUI with a transceiver on the main cable. Phan Vĩnh Thuần Computer Network 22
23. Phan Vĩnh Thuần Computer Network 23
24. 5.1.5. Thực hiện UTP (UTP implementation) • EIA/TIA specifies an RJ-45 connector for UTP cable. The letters RJ stand for registered jack, and the number 45 refers to a specific wiring sequence. The RJ-45 transparent end connector shows eight colored wires. Four of the wires carry the voltage and are considered “tip” (T1 through T4). The other four wires are grounded and are called “ring” (R1 through R4). Tip and ring are terms that originated in the early days of the telephone. Today, these terms refer to the positive and the negative wire in a pair. The wires in the first pair in a cable or a connector are designated as T1 and R1. The second pair is T2 and R2, and Phanso Vĩnhon Thuần. Computer Network 24
25. • The RJ-45 connector is the male component, crimped on the end of the cable. When looking at the male connector from the front, the pin locations are numbered 8 on the left down to 1 on the right as seen in Figure. Phan Vĩnh Thuần Computer Network 25
26. • The jack is the female component in a network device, wall outlet, or patch panel as seen in Figure . Phan Vĩnh Thuần Computer Network 26
27. • For electricity to run between the connector and the jack, the order of the wires must follow EIA/TIA-T568-A or T568-B standards, as shown in Figure. Identify the correct EIA/TIA category of cable to use for a connecting device by determining what standard is being used by the jack on the network device. In addition to identifying the correct EIA/TIA category of cable, determine whether to use a straight- through cable or a crossover cable. Phan Vĩnh Thuần Computer Network 27
28. Phan Vĩnh Thuần Computer Network 28
29. • If the two RJ-45 connectors of a cable are held side by side in the same orientation, the colored wires will be seen in each. If the order of the colored wires is the same at each end, then the cable is straight-through as seen in the figure. Phan Vĩnh Thuần Computer Network 29
30. Phan Vĩnh Thuần Computer Network 30
31. • With crossover, the RJ-45 connectors on both ends show that some of the wires on one side of the cable are crossed to a different pin on the other side of the cable. The figure shows that pins 1 and 2 on one connector connect respectively to pins 3 and 6 on the other. Phan Vĩnh Thuần Computer Network 31
32. Phan Vĩnh Thuần Computer Network 32
33. • The figure shows the guidelines for what type of cable to use when interconnecting Cisco devices. Use straight-through cables for the following cabling: – Switch to router – Switch to PC or server – Hub to PC or server Phan Vĩnh Thuần Computer Network 33
34. • Use crossover cables for the following cabling: – Switch to switch – Switch to hub – Hub to hub – Router to router – PC to PC – Router to PC Phan Vĩnh Thuần Computer Network 34
35. Phan Vĩnh Thuần Computer Network 35
36. 5.1.6. Các repeater • The term repeater comes from the early days of long distance communication. The term describes the situation when a person on one hill would repeat the signal that was just received from the person on the previous hill. The process would repeat until the message arrived at its destination. Telegraph, telephone, microwave, and optical communications use repeaters to strengthen signals sent over long distances. Phan Vĩnh Thuần Computer Network 36
37. • A repeater receives a signal, regenerates it, and passes it on. It can regenerate and retime network signals at the bit level to allow them to travel a longer distance on the media. The Four Repeater Rule for 10-Mbps Ethernet should be used as a standard when extending LAN segments. This rule states that no more than four repeaters can be used between hosts on a LAN. This rule is used to limit latency added to frame travel by each repeater. Too much latency on the LAN increases the number of late collisions and makes the LAN less efficient. Phan Vĩnh Thuần Computer Network 37
38. Phan Vĩnh Thuần Computer Network 38
39. 5.1.7. Hub • Hubs are actually multiport repeaters. In many cases, the difference between the two devices is the number of ports that each provides. While a typical repeater has just two ports, a hub generally has from four to twenty-four ports. Hubs are most commonly used in Ethernet 10BASE-T or 100BASE-T networks, although there are other network architectures that use them as well. Phan Vĩnh Thuần Computer Network 39
40. • Using a hub changes the network topology from a linear bus, where each device plugs directly into the wire, to a star. With hubs, data arriving over the cables to a hub port is electrically repeated on all the other ports connected to the same network segment, except for the port on which the data was sent. • Hubs come in three basic types: Phan Vĩnh Thuần Computer Network 40
41. • Passive – A passive hub serves as a physical connection point only. It does not manipulate or view the traffic that crosses it. It does not boost or clean the signal. A passive hub is used only to share the physical media. As such, the passive hub does not need electrical power. • Active – An active hub must be plugged into an electrical outlet because it needs power to amplify the incoming signal before passing it out to the other ports. • Intelligent – Intelligent hubs are sometimes called smart hubs. These devices basically function as active hubs, but also include a microprocessor chip and diagnostic capabilities. Intelligent hubs are more expensive than active hubs, but are useful in troubleshooting situations. Phan Vĩnh Thuần Computer Network 41
42. Phan Vĩnh Thuần Computer Network 42
43. • Devices attached to a hub receive all traffic traveling through the hub. The more devices there are attached to the hub, the more likely there will be collisions. A collision occurs when two or more workstations send data over the network wire at the same time. All data is corrupted when that occurs. Every device connected to the same network segment is said to be a member of a collision domain. • Sometimes hubs are called concentrators, because hubs serve as a central connection point for an Ethernet LAN. Phan Vĩnh Thuần Computer Network 43
44. 5.1.8. Wireless • A wireless network can be created with much less cabling than other networks. Wireless signals are electromagnetic waves that travel through the air. Wireless networks use Radio Frequency (RF), laser, infrared (IR), or satellite/microwaves to carry signals from one computer to another without a permanent cable connection. The only permanent cabling can be to the access points for the network. Phan Vĩnh Thuần Computer Network 44
45. • Workstations within the range of the wireless network can be moved easily without connecting and reconnecting network cabling. • A common application of wireless data communication is for mobile use. Some examples of mobile use include commuters, airplanes, satellites, remote space probes, space shuttles, and space stations. Phan Vĩnh Thuần Computer Network 45
46. • At the core of wireless communication are devices called transmitters and receivers. The transmitter converts source data to electromagnetic (EM) waves that are passed to the receiver. The receiver then converts these electromagnetic waves back into data for the destination. For two- way communication, each device requires a transmitter and a receiver. Many networking device manufacturers build the transmitter and receiver into a single unit called a transceiver or wireless network card. All devices in wireless LANs (WLANs) must have the appropriate wireless network card installed. Phan Vĩnh Thuần Computer Network 46
47. • The two most common wireless technologies used for networking are IR and RF. IR technology has its weaknesses. Workstations and digital devices must be in the line of sight of the transmitter in order to operate. An infrared-based network suits environments where all the digital devices that require network connectivity are in one room. IR networking technology can be installed quickly, but the data signals can be weakened or obstructed by people walking across the room or by moisture in the air. There are, however, new IR technologies being developed that can work out of sight. Phan Vĩnh Thuần Computer Network 47
48. • Radio Frequency technology allows devices to be in different rooms or even buildings. The limited range of radio signals restricts the use of this kind of network. RF technology can be on single or multiple frequencies. A single radio frequency is subject to outside interference and geographic obstructions. Furthermore, a single frequency is easily monitored by others, which makes the transmissions of data insecure. Phan Vĩnh Thuần Computer Network 48
49. • Spread spectrum avoids the problem of insecure data transmission by using multiple frequencies to increase the immunity to noise and to make it difficult for outsiders to intercept data transmissions. Phan Vĩnh Thuần Computer Network 49
50. • Two approaches currently being used to implement spread spectrum for WLAN transmissions are Frequency Hopping Spread Spectrum (FHSS) and Direct Sequence Spread Spectrum (DSSS). The technical details of how these technologies work are beyond the scope of this course Phan Vĩnh Thuần Computer Network 50
51. Phan Vĩnh Thuần Computer Network 51
52. 5.1.9. Bridges • There are times when it is necessary to break up a large LAN into smaller, more easily managed segments. This decreases the amount of traffic on a single LAN and can extend the geographical area past what a single LAN can support. The devices that are used to connect network segments together include bridges, switches, routers, and gateways. Phan Vĩnh Thuần Computer Network 52
53. • Switches and bridges operate at the Data Link layer of the OSI model. The function of the bridge is to make intelligent decisions about whether or not to pass signals on to the next segment of a network. Phan Vĩnh Thuần Computer Network 53
54. Phan Vĩnh Thuần Computer Network 54
55. Phan Vĩnh Thuần Computer Network 55
56. • When a bridge receives a frame on the network, the destination MAC address is looked up in the bridge table to determine whether to filter, flood, or copy the frame onto another segment. This decision process occurs as follows: – If the destination device is on the same segment as the frame, the bridge blocks the frame from going on to other segments. This process is known as filtering. Phan Vĩnh Thuần Computer Network 56
57. – If the destination device is on a different segment, the bridge forwards the frame to the appropriate segment. – If the destination address is unknown to the bridge, the bridge forwards the frame to all segments except the one on which it was received. This process is known as flooding. • If placed strategically, a bridge can greatly improve network performance. Phan Vĩnh Thuần Computer Network 57
58. 5.1.10. Switch • A switch is sometimes described as a multiport bridge. While a typical bridge may have just two ports linking two network segments, the switch can have multiple ports depending on how many network segments are to be linked. Phan Vĩnh Thuần Computer Network 58
59. Phan Vĩnh Thuần Computer Network 59
60. • Like bridges, switches learn certain information about the data packets that are received from various computers on the network. Switches use this information to build forwarding tables to determine the destination of data being sent by one computer to another computer on the network. Phan Vĩnh Thuần Computer Network 60
61. Phan Vĩnh Thuần Computer Network 61
62. • Although there are some similarities between the two, a switch is a more sophisticated device than a bridge. A bridge determines whether the frame should be forwarded to the other network segment based on the destination MAC address. A switch has many ports with many network segments connected to them. A switch chooses the port to which the destination device or workstation is connected. Ethernet switches are becoming popular connectivity solutions because, like bridges, switches improve network performance by improving speed and bandwidth. Phan Vĩnh Thuần Computer Network 62
63. • Switching is a technology that alleviates congestion in Ethernet LANs by reducing the traffic and increasing the bandwidth. Switches can easily replace hubs because switches work with existing cable infrastructures. This improves performance with a minimum of intrusion into an existing network. Phan Vĩnh Thuần Computer Network 63
64. • In data communications today, all switching equipment performs two basic operations. The first operation is called switching data frames. Switching data frames is the process by which a frame is received on an input medium and then transmitted to an output medium. The second is the maintenance of switching operations where switches build and maintain switching tables and search for loops • Switches operate at much higher speeds than bridges and can support new functionality, such as virtual LANs. Phan Vĩnh Thuần Computer Network 64
65. • An Ethernet switch has many benefits. One benefit is that an Ethernet switch allows many users to communicate in parallel through the use of virtual circuits and dedicated network segments in a virtually collision-free environment. This maximizes the bandwidth available on the shared medium. Another benefit is that moving to a switched LAN environment is very cost effective because existing hardware and cabling can be reused Phan Vĩnh Thuần Computer Network 65
66. 5.1.11. Host connectivity • The function of a NIC is to connect a host device to the network medium. A NIC is a printed circuit board that fits into the expansion slot on the motherboard or peripheral device of a computer. The NIC is also referred to as a network adapter. On laptop or notebook computers a NIC is the size of a credit card. Phan Vĩnh Thuần Computer Network 66
67. Phan Vĩnh Thuần Computer Network 67
68. Phan Vĩnh Thuần Computer Network 68
69. • NICs are considered Layer 2 devices because each NIC carries a unique code called a MAC address. This address is used to control data communication for the host on the network. More will be learned about the MAC address later. As the name implies, the network interface card controls host access to the medium. • In diagrams, NICs have no standardized symbol. It is implied that, when networking devices are attached to network media, there is a NIC or NIC-like device present. Wherever a dot is seen on a topology map, it represents either a NIC interface or port, which acts like a Phan Vĩnh Thuần Computer Network 69 NIC.
70. • In some cases the type of connector on the NIC does not match the type of media that needs to be connected to it. A good example is a Cisco 2500 router. On the router an AUI connector is seen. That AUI connector needs to connect to a UTP Cat 5 Ethernet cable. To do this a transmitter/receiver, also known as a transceiver, is used. Phan Vĩnh Thuần Computer Network 70
71. • A transceiver converts one type of signal or connector to another. For example, a transceiver can connect a 15-pin AUI interface to an RJ-45 jack. It is considered a Layer 1 device because it only works with bits, and not with any address information or higher-level protocols Phan Vĩnh Thuần Computer Network 71
72. 5.1.12. Peer-to-peer • By using LAN and WAN technologies, many computers are interconnected to provide services to their users. To accomplish this, networked computers take on different roles or functions in relation to each other. Some types of applications require computers to function as equal partners. Phan Vĩnh Thuần Computer Network 72
73. • In other case, two computers typically communicate with each other by using request/response protocols. One computer issues a request for a service, and a second computer receives and responds to that request. The requestor takes on the role of a client, and the responder takes on the role of a server. Phan Vĩnh Thuần Computer Network 73
74. Phan Vĩnh Thuần Computer Network 74
75. • In a peer-to-peer network, networked computers act as equal partners, or peers. As peers, each computer can take on the client function or the server function. At one time, computer A may make a request for a file from computer B, which responds by serving the file to computer A. Computer A functions as client, while B functions as the server. At a later time, computers A and B can reverse roles. Phan Vĩnh Thuần Computer Network 75
76. • In a peer-to-peer network, individual users control their own resources. The users may decide to share certain files with other users. The users may also require passwords before allowing others to access their resources. Since individual users make these decisions, there is no central point of control or administration in the network. In addition, individual users must back up their own systems to be able to recover from data loss in case of failures. Phan Vĩnh Thuần Computer Network 76
77. • When a computer acts as a server, the user of that machine may experience reduced performance as the machine serves the requests made by other systems. • Peer-to-peer networks are relatively easy to install and operate. No additional equipment is necessary beyond a suitable operating system installed on each computer. Since users control their own resources, no dedicated administrators are needed Phan Vĩnh Thuần Computer Network 77
78. • As networks grow, peer-to-peer relationships become increasingly difficult to coordinate. A peer-to-peer network works well with 10 or fewer computers. Since peer-to-peer networks do not scale well, their efficiency decreases rapidly as the number of computers on the network increases. Also, individual users control access to the resources on their computers, which means security may be difficult to maintain. The client/server model of networking can be used to overcome the limitations of the peer- Phanto -Vĩnhpeer Thuần network. Computer Network 78
79. 5.1.13. client/server • In a client/server arrangement, network services are located on a dedicated computer called a server. The server responds to the requests of clients. The server is a central computer that is continuously available to respond to requests from clients for file, print, application, and other services. Phan Vĩnh Thuần Computer Network 79
80. • Most network operating systems adopt the form of a client/server relationship. Typically, desktop computers function as clients and one or more computers with additional processing power, memory, and specialized software function as servers. Phan Vĩnh Thuần Computer Network 80
81. Phan Vĩnh Thuần Computer Network 81
82. • Servers are designed to handle requests from many clients simultaneously. Before a client can access the server resources, the client must be identified and be authorized to use the resource. This is done by assigning each client an account name and password that is verified by an authentication service. The authentication service acts as a sentry to guard access to the network. Phan Vĩnh Thuần Computer Network 82
83. • With the centralization of user accounts, security, and access control, server-based networks simplify the administration of large networks. Phan Vĩnh Thuần Computer Network 83
84. • The concentration of network resources such as files, printers, and applications on servers also makes the data generated easier to back-up and maintain. Rather than having these resources spread around individual machines, resources can be located on specialized, dedicated servers for easier access. Most client/server systems also include facilities for enhancing the network by adding new services that extend the usefulness of the network. Phan Vĩnh Thuần Computer Network 84
85. • The distribution of functions in the client/server networks brings substantial advantages, but it also incurs some costs. Although the aggregation of resources on server systems brings greater security, simpler access and coordinated control, the server introduces a single point of failure into the network. Without an operational server, the network cannot function at all. Phan Vĩnh Thuần Computer Network 85
86. • Servers require a trained, expert staff to administer and maintain. This increases the expense of running the network. Server systems also require additional hardware and specialized software that add to the cost. Phan Vĩnh Thuần Computer Network 86
87. Phan Vĩnh Thuần Computer Network 87
88. Phan Vĩnh Thuần Computer Network 88
89. 5.2. Cabling the WAN 5.2.1. WAN physical layer • The physical layer implementations vary depending on the distance of the equipment from the services, the speed, and the type of service itself. Serial connections are used to support WAN services such as dedicated leased lines that run Point-to-Point Protocol (PPP) or Frame Relay. Phan Vĩnh Thuần Computer Network 89
90. • The speed of these connections ranges from 2400 bits per second (bps) to T1 service at 1.544 megabits per second (Mbps) and E1 service at 2.048 megabits per seconds (Mbps). Phan Vĩnh Thuần Computer Network 90
91. Phan Vĩnh Thuần Computer Network 91
92. • ISDN offers dial-on-demand connections. An ISDN Basic Rate Interface (BRI) is composed of two 64 kbps bearer channels (B channels) for data, and one delta channel (D channel) at 16 kbps used for signaling and other link-management tasks. PPP is typically used to carry data over the B channels. Phan Vĩnh Thuần Computer Network 92
93. • With the increasing demand for residential broadband high-speed services, DSL and cable modem connections are becoming more popular. For example, typical residential DSL service can achieve T1/E1 speeds over the existing telephone line. Cable services use the existing coaxial cable TV line. A coaxial cable line provides high-speed connectivity matching or exceeding that of DSL. DSL and cable modem service will be covered in more detail in a later module. Phan Vĩnh Thuần Computer Network 93
94. 5.2.2. Các kết nối WAN nối tiếp • For long distance communication, WANs use serial transmission. This is a process by which bits of data are sent over a single channel. This process provides more reliable long distance communication and the use of a specific electromagnetic or optical frequency range. Phan Vĩnh Thuần Computer Network 94
95. • Frequencies are measured in terms of cycles per second and expressed in Hertz (Hz). Signals transmitted over voice grade telephone lines use 4 kilohertz (kHz). The size of the frequency range is referred to as bandwidth. In networking, bandwidth is a measure of the bits per second that are transmitted. Phan Vĩnh Thuần Computer Network 95
96. • For a Cisco router, physical connectivity at the customer site is provided by one of two types of serial connections. The first type of serial connections is a 60-pin connector. The second is a more compact ‘smart serial’ connector. The provider connector will vary depending on the type of service equipment. Phan Vĩnh Thuần Computer Network 96
97. • If the connection is made directly to a service provider, or a device that provides signal clocking such as a channel/data service unit (CSU/DSU), the router will be a data terminal equipment (DTE) and use a DTE serial cable. Typically this is the case. However, there are occasions where the local router is required to provide the clocking rate and therefore will use a data communications equipment (DCE) cable. Phan Vĩnh Thuần Computer Network 97
98. Phan Vĩnh Thuần Computer Network 98
99. 5.3.2. Router and Serial connection • Routers are responsible for routing data packets from source to destination within the LAN, and for providing connectivity to the WAN. Within a LAN environment the router contains broadcasts, provides local address resolution services, such as ARP (address resolution protocol) and RARP (Reverse Address Resolution Protocol), and may segment the network using a subnetwork structure. In order to provide these services the router must be connected to the LAN and WANPhan Vĩnh Thuần Computer Network 99
100. Phan Vĩnh Thuần Computer Network 100
101. • In addition to determining the cable type, it is necessary to determine whether DTE or DCE connectors are required. The DTE is the endpoint of the user’s device on the WAN link. The DCE is typically the point where responsibility for delivering data passes into the hands of the service provider. Phan Vĩnh Thuần Computer Network 101
102. • When connecting directly to a service provider, or to a device such as a CSU/DSU that will perform signal clocking, the router is a DTE and needs a DTE serial cable.This is typically the case for routers. However, there are cases when the router will need to be the DCE. When performing a back-to- back router scenario in a test environment, one of the routers will be a DTE and the other will be a DCE. Phan Vĩnh Thuần Computer Network 102
103. Phan Vĩnh Thuần Computer Network 103
104. • When cabling routers for serial connectivity, the routers will either have fixed or modular ports. The type of port being used will affect the syntax used later to configure each interface. • Interfaces on routers with fixed serial ports are labeled for port type and port number. Phan Vĩnh Thuần Computer Network 104
105. Phan Vĩnh Thuần Computer Network 105
106. • Interfaces on routers with modular serial ports are labeled for port type, slot, and port number. The slot is the location of the module. To configure a port on a modular card, it is necessary to specify the interface using the syntax “port type slot number/port number.” Use the label “serial 1/0,” when the interface is serial, the slot number where the module is installed is slot 1, and the port that is being referenced is port 0. Phan Vĩnh Thuần Computer Network 106
107. Phan Vĩnh Thuần Computer Network 107
108. 5.2.4. Router and ISDN BRI connections • With ISDN (Integrated Services Digital Network ) BRI, two types of interfaces may be used, BRI S/T and BRI U. Determine who is providing the Network Termination 1 (NT1) device in order to determine which interface type is needed. Phan Vĩnh Thuần Computer Network 108
109. • An NT1 is an intermediate device located between the router and the service provider ISDN switch. In North America, the customer typically provides the NT1, while in the rest of the world the service provider provides the NT1 device. Phan Vĩnh Thuần Computer Network 109
110. • It may be necessary to provide an external NT1 if the device is not already integrated into the router. Reviewing the labeling on the router interfaces is usually the easiest way to determine if the router has an integrated NT1. A BRI interface with an integrated NT1 is labeled BRI U. A BRI interface without an integrated NT1 is labeled BRI S/T. Phan Vĩnh Thuần Computer Network 110
111. • Because routers can have multiple ISDN interface types, determine which interface is needed when the router is purchased. The type of BRI interface may be determined by looking at the port label. To interconnect the ISDN BRI port to the service-provider device, use a UTP Category 5 straight-through cable. Phan Vĩnh Thuần Computer Network 111
112. Phan Vĩnh Thuần Computer Network 112
113. • Caution: It is important to insert the cable running from an ISDN BRI port only to an ISDN jack or an ISDN switch. ISDN BRI uses voltages that can seriously damage non-ISDN devices. Phan Vĩnh Thuần Computer Network 113
114. 5.2.5. Router and DSL connections • The Cisco 827 ADSL router has one asymmetric digital subscriber line (ADSL) interface. To connect an ADSL line to the ADSL port on a router, do the following: – Connect the phone cable to the ADSL port on the router. – Connect the other end of the phone cable to the phone jack. Phan Vĩnh Thuần Computer Network 114
115. • To connect a router for DSL service, use a phone cable with RJ-11 connectors. DSL works over standard telephone lines using pins 3 and 4 on a standard RJ-11 connector. Phan Vĩnh Thuần Computer Network 115
116. Phan Vĩnh Thuần Computer Network 116
117. 5.2.6. Router và các kết nối cáp • The Cisco uBR905 cable access router provides high-speed network access on the cable television system to residential and small office, home office (SOHO) subscribers. The uBR905 router has a coaxial cable, or F-connector, interface that connects directly to the cable system. Coaxial cable and a BNC connector are used to connect the router and cable system. Phan Vĩnh Thuần Computer Network 117
118. • Use the following steps to connect the Cisco uBR905 cable access router to the cable system: – Verify that the router is not connected to power. – Locate the coaxial cable coming from the coaxial cable (TV) wall outlet. – Install a cable splitter/directional coupler, if needed, to separate signals for TV and computer use. If necessary, also install a high-pass filter to prevent interference Phan Vĩnhbetween Thuần the TVComputerand Networkcomputer signals. 118
119. – Connect the coaxial cable to the F connector of the router. Hand-tighten the connector, making sure that it is finger- tight, and then give it a 1/6 turn with a wrench. – Make sure that all other coaxial cable connectors, all intermediate splitters, couplers, or ground blocks, are securely tightened from the distribution tap to the Cisco uBR905 router. Phan Vĩnh Thuần Computer Network 119
120. • Caution: Do not over tighten the connector. Over tightening may break off the connector. Do not use a torque wrench because of the danger of tightening the connector more than the recommended 1/6 turns after it is finger-tight. Phan Vĩnh Thuần Computer Network 120
121. Phan Vĩnh Thuần Computer Network 121
122. 5.2.7. Setting up console connections • To initially configure the Cisco device, a management connection must be directly connected to the device. For Cisco equipment this management attachment is called a console port. The console port allows monitoring and configuration of a Cisco hub, switch, or router. Phan Vĩnh Thuần Computer Network 122
123. • The cable used between a terminal and a console port is a rollover cable, with RJ-45 connectors. The rollover cable, also known as a console cable, has a different pinout than the straight-through or crossover RJ- 45 cables used with Ethernet or the ISDN BRI. Phan Vĩnh Thuần Computer Network 123
124. • The pinout for a rollover is as follows: 1 to 8 2 to 7 3 to 6 4 to 5 5 to 4 6 to 3 7 to 2 8 to 1 Phan Vĩnh Thuần Computer Network 124
125. • To set up a connection between the terminal and the Cisco console port, perform two steps. First, connect the devices using a rollover cable from the router console port to the workstation serial port. An RJ-45-to-DB-9 or an RJ-45-to-DB- 25 adapter may be required for the PC or terminal. Next, configure the terminal emulation application with the following common equipment (COM) port settings: 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control. Phan Vĩnh Thuần Computer Network 125
126. • The AUX port is used to provide out-of- band management through a modem. The AUX port must be configured by way of the console port before it can be used. The AUX port also uses the settings of 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control. Phan Vĩnh Thuần Computer Network 126
127. Phan Vĩnh Thuần Computer Network 127